|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
;
Thank you very much for the manual. It is what I needed and it will be very helpful to me. The delivery of the manual was easy and very fast. I strongly recommend this site to other users. Best regards.
 ;
Excellent!! Got what I need and very fast!! Thank You
;
Manual acquired with good resolution, complete in all its pages, very good policy of the folder where are saved all products purchased.
;
Service manual very complete and clear. It was very helpfull for my work.
1
2
3
4
Step 6: DIR A
A
Check that the S/PDIF signal is output. Check that changes by pulling out and inserting the digital input lines. IC601 (pin 1) IN1 (OPT: TV/SAT)
IC952 (pin 14) Do convert 3 V into 5 V for pin 6 input? Yes IC952 (pin 13) Do convert 3 V into 5 V for pin 7 input? Yes To Step 5
No Replace IC952.
Can No Check the DIGITAL INPUT Assy, observe the digital signal and parts and patterns in the path. ? (0 V <-> 4 V) Yes IC601 (pin 5) IN2 (OPT: CD-R/TAPE/MD)
B
No
Replace IC952.
Can observe the No Check the DIGITAL INPUT Assy, digital signal and parts and patterns in the path. ? (0 V <-> 4 V) Yes IC601 (pin 44) Can observe the digital signal ? Yes IN3 (COAX: DVD/LD)
Step 5: X'tal
IC802 (pin 2)
C
No
Check the parts and patterns in the path.
(1.65 V center, amplitude more than 0.2 Vp-p) IN4 (COAX: CD)
Is there a 24.576 MHz output? Yes IC802 (pin 7)
No Replace IC802 or X801.
IC601 (pin 42)
Can observe the No Check the parts and patterns digital signal in the path. ? (1.65 V center, amplitude more than 0.2 Vp-p) Yes No Check the path to pin 45 of IC801. Replace IC802. IC601 (pin 27) Is there a master clock output? No Check the path to pin 30 of IC601. Replace IC802. MCKO2 (Master clock) Check that the data and clock signals are output.
Is there a 24.576 MHz output? Yes
D
IC802 (pin 5)
Is there a 24.576 MHz output? Yes To Step 6
Is the No voltage of PDN IC601-pin 31 5 V? (0 V <-> 3.3 V) Check the other assy. (surrounding of the Yes microcomputer) No No Replace IC601.
IC601 (pin 24)
LRCK (LR clock)
E
Is there a LR clock output? Yes
No Replace IC601. (0 V <-> 3.3 V)
B
F
20
1 2
VSX-518-K
3 4
|
|
|
> |
|
