|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
;
Very good scanning quality. All schematics are very legible. Worth every cent !
1
2
3
4
7.3.4.3 Troubleshooting Step 1: Connectors
A
CN701, CN702 Are the connectors securely inserted ? Yes
6
IC703 (pin 1), IC702 (pin 7)
3.3 V Reg. output / 1.8 V Reg. input Is IC703 abnormally hot? Yes No
No Insert the connectors securely.
Is the voltage 3.3 V ? Yes
No
Replace IC703.
To STEP 2 The output and GND may be short-circuited. Check the path between them.
Step 2: Power supply
B
7
IC762 (pins 37, 47) FLASH ROM
1
CN702 (pin 4) Is the voltage 5V? Yes
5 V input Is there any loose connection of CN702? Yes Is the voltage 3.3 V ? Yes Check the MOTHER Assy. No Check the parts and patterns in the path.
No
No
8
IC761 (pins 1,3,9,14,27,43,49) SDRAM
To STEP 1
2
C
IC703 (pin 3)
3.3 V Regulator IC input
Is the voltage 3.3 V ? Yes
No
Check the parts and patterns in the path.
Is the voltage 5V? Yes
No
Check the patterns in the path.
9
IC953 (pin 14) Is the voltage 3.3 V ? Yes
5-3 Converter
No
Check the parts and patterns in the path.
3
IC951 (pin 14)
3-5 Converter
D
Is the voltage 5V? Yes
No
Check the parts and patterns in the path.
10 IC701 (pins 16,33,64,76,112) USB Media control IC
Is the voltage 3.3 V ? Yes
No
Check the parts and patterns in the path.
4
IC771 (pin 5)
USB Power SW
Is the voltage 5V? Yes
E
No
Check the parts and patterns in the path.
11
IC702 (pin 1)
1.8 V Regulator output
5 IC7814 (pins 14, 15) DAC
Is the voltage 5V? Yes No Check the parts and patterns in the path.
Is the voltage 1.8 V ? Yes
No
Is IC702 abnormally hot? Yes
No
Replace IC702.
The output and GND may be short-circuited. Check the path between them.
A
F
134
1 2
VSX-816-K
3 4
|
|
|
> |
|
