|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
complete part-lists and pcb layout, schematic diagram is good enlargable,
;
Excellent, fast delivery, excellent product. Good luck!
;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
;
Great to have extra resources for Service Manuals, Now days you can really not trouble shoot efficiently without one , Wayne at IRIONS TV & ELECTRONICS REPAIR Clearwater , Fl. 33755 727-446-7955
 ;
For five bucks you can barely buy a hamburger. Or for the same five bucks you can buy a service manual. Much more useful. (and better for your health, depending on where you buy your hamburgers).
Yes, there are free manual sites out there, but if they don't have what you want, you have to pay.
And five bucks isn't much. Not for full specs, schematics and adjustment and parts replacement procedures.
My only criticism is that grayscale illustrations aren't well rendered, but I've seen worse.
Schematics and text are clear.
I'll be happy to purchase from here again.
Mike
[email protected]
5
6
7
8
C
R452 C414 SY IN VCSDA
A
b-2
Is there a Y signal? Yes C420 SC IN No Diagnose between the BOARD TO BOARD Assy and S. VIDEO Assy.
d-1
Is there a same signal as VCSDA (0 to 3.3 V)? Yes R454 VCSCL No Check the Q451. If Q451 is failure, replace Q451.
b-3
Is there a C signal? Yes No Diagnose between the BOARD TO BOARD Assy and S. VIDEO Assy. Is there a same signal as VCSCL (0 to 3.3 V)? Yes
d-2
No Check the Q451. If Q451 is failure, replace Q451.
B
Note: Check is unnecessary because component input does not convert it.
Step 3-5: VIDEO CLK, DATA
IC701 (Pin 48) LLC1
Step 3-3: Reset
CN318 (Pin 2) XVCRST
e A
Is the voltage "H" (5 V)? No Diagnose between the BOARD TO BOARD Assy and MAIN Assy. Is there a clock (27 MHz)? Yes IC701 (Pins 2 to 9) P8 to P15 No Check the parts and patterns in the path (IC401). If IC401 is failure, replace IC401.
C
X'tal
Yes
f
IC401 (Pin 22) Is there the CLK (28.63636MHz) ? Yes XTAL
c
No Check the X401 or IC402. If X401 or IC402 is failure, replace X401 or IC402.
Is there a data?
No Check the parts and patterns in the path. If IC401 is failure, replace IC401.
Yes
Step 3-6: Video Output
IC701 (Pin 35) DACA
D
Step 3-4: I2C
CN318 (Pin 4) VCSDA
g-1
Is there a composite signal? Yes CN316 (Pin 21) No Check the parts and patterns in the path. If IC701 or R731 or R732 or Q731 is failure, replace it. CVBS OUT
A
Does a signal output in constant period (0 to 5 V) ? Yes CN318 (Pin 3) No Diagnose between the BOARD TO BOARD Assy and MAIN Assy.
a
VCSCL Is there a composite signal? Yes IC701 (Pin 33) DACB No Check the parts and patterns in the path. If Q731 or R733 is failure, replace Q731 or R733. No Diagnose between the BOARD TO BOARD Assy and MAIN Assy.
E
A
Does a clock output in constant period (0 to 5 V) ? Yes
g-2
Is there a Y signal? Yes No Check the parts and patterns in the path. If IC701 or R741 or R742 or Q741 is failure, replace it.
F
D
VSX-917V-K
5 6 7 8
115
|
|
|
> |
|
