|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
OK?..manual is complet and helpfull... for repairing such a old and rare boombox like JVC PCM it is necessary...
;
Super Anleitung. Ordentliche Auflösung. Das ganze noch in Deutsch wäre zu schön. Alle Datenblätter sind sauber Kopiert und alle Leitungswege sind sauber ausgeführt
;
Thanks God for the internet and thanks for the service like this - proffessional solution on time.
;
About the service it's very fast and reliable. About the manual the quality is high enough to read even the tiniest details on the wiring diagrams so you can't ask much more than that, let it alone for a manual of a product from 20 years ago. Thank you, very satisfied.
;
The downloaded quality was as good as the orignial
1
2
3
4
Step 3: HDMI
A
Step 3-2: CLK, DATA
Step 3-3: Tx
U
IC101 (pins 1-3, 121) VIDEO No Check the soldering of IC101. If soldering has not been done correctly, replace IC101.
W
D381 (Cathode) HPD No Check the soldering of D381. If soldering has not been done correctly, replace D381.
Is there a clock ?
Is the voltage "H" (5 V)?
U
B
Yes
X
Yes DDC_TX No Check the soldering of IC301. If soldering has not been done correctly, replace IC301.
IC101 (pins D0-D23) No Check the soldering of IC101. If soldering has not been done correctly, replace IC101.
IC301 (pins 19, 20)
Is there a data ?
Is there a signal ?
U
Yes AUDIO (DVD) No Check the soldering of IC101. If soldering has not been done correctly, replace IC101.
Y
Yes
IC101 (pins 78, 88) Are there clock and data?
C
Q353 (pins 3, 6) Are signals the No Check the soldering of Q353. same as those at Pins 4 and 1 but whose voltage If soldering has not been done has been converted correctly, replace Q353. from 3V to 5V detected? Yes Yes
V
Yes IC201 (pin 11)
Z
Is there a data ? Yes Check the INTERFACE Assy and DIGITAL MOTHER Assy.
D
No
Check the soldering of IC201. If soldering has not been done correctly, replace IC201.
IC301 (pins 26, 27, 29, 30, 32, 33, 35, 36) TMDS_TX
Do signals (approx. 0.5 Vp-p) run in all the lines? Yes
No Check the soldering of IC301. If soldering has not been done correctly, replace IC301.
U
IC101 (pins 81-88) Are there clock and data? Yes AUDIO (DVD-AUDIO/Multi ch)
CN301
Is soldering of No Check the soldering of IC101. If soldering has not been done correctly, replace IC101. CN301 OK? Yes Replace CN301
No
Solder the CN301correctly.
V
E
IC201 (pins 12-18) Are there clock and data? Yes Check the INTERFACE Assy and DIGITAL MOTHER Assy. No Check the soldering of IC201. If soldering has not been done correctly, replace IC201.
F
214
1 2
VSX-74TXVi
3 4
|
|
|
> |
|
