|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1
2
3
4
Display 1
A
2
3
4
5
6
7
8
9
10
1 SIGNAL SELECT indicators Lights to indicate the type of input signal assigned for the current component: B AUTO Lights when AUTO signal select is on SB Depending on the source, this lights when a signal with surround back channel encoding is detected. DIGITAL Lights when a digital audio signal is detected. 2 DIGITAL Lights when a Dolby Digital encoded signal is detected. ANALOG Lights when an analog signal is detected. DTS Lights when a source with DTS encoded audio signals is detected.
11
12
7 MIDNIGHT Lights during Midnight listening. 8 MONITOR Lights when MONITOR is selected
13
14
9 Speaker indicator Shows the speaker system currently in use. 10 Character display
11 ADV. SURR (Advanced Surround) Lights when one of the Advanced Surround modes has been selected. 12 LOUDNESS
Lights when LOUDNESS has been selected. 13 TUNER indicators
STEREO: Lights when a stereo FM broadcast is being received in auto stereo mode. MONO: Lights when the mono mode is set using the MPX button. TUNED: Lights when a broadcast is being received. 14 Master volume level Shows the overall volume level. ---dB indicates the minimum level, and �0 dB indicates the maximum level.
C
2 DTS When the Standard mode of the receiver is on, this lights to indicate decoding of a DTS signal. 3 2 DIGITAL When the Standard mode of the receiver is on, this lights to indicate decoding of a Dolby Digital signal. 4 2 PRO LOGIC II When the Standard mode of the receiver is on, this lights to indicate Pro Logic II decoding. 5 ATT Lights when INPUT ATT is used to attenuate (reduce) the level of the analog input signal. 6 DIRECT Lights when source direct playback is in use. This function bypasses all tone, balance, Advanced surround, and Dolby Surround effects.
Depending on your level settings for each channel, the maximum level can range between �10 dB and �0 dB.
D
76
1 2
VSX-D511
3 4
|
|
|
> |
|