|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I liked the product. I would use their sevices again.
 ;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
;
Very good service for get any documentation. Fast and perfect quality.
VSX-D607S
6. ADJUSTMENT
6.1 TUNER ADJUSTMENT
� Set the FM/AM selector to FM BAND. � Connect the wiring as shown in Fig. 6�1.
Step No. Adjustment Title Frequency (MHz) 98 Non modulation 98 98 98
ADJUSTMENT OF FM TUNER SECTION
FM SG (1kHz, ± 75kHz dev.) Level (dBµV) 80 or more Low input (0 to 30) 80 15 (± 2dB)
Reception Frequency Display �
Adjustment Location
Specifications Adjust so that the DC voltage between IC6201-pin 4 and pin 28 (or leads of C6224 and C6261) becomes 0V ± 50mV. Adjust so that the DC voltage between IC6201-pin 12 and GND (or leads of C6238 and GND) becomes at maximum level. Minimize the distortion with 1/8 rotation of the core. Adjust so that the indicator of TUNED IND. starts to light up.
1
Center Adjustment Front End Sensitivity Adjustment Stereo Distortion TUNED IND. Lighting Level
L6207 L6102 T6101 T6101 VR6201
2 3 4
98MHz 98MHz 98MHz
Notes: � Before adjusting, make sure there is no gap between L6101 and L6102 . If there is a gap between them, bring them into contact with each other first, and then make adjustments. � Make indicator adjustments in order of AM�FM.
� Set the FM/AM selector to AM BAND. � Connect the wiring as shown in Fig. 6�1.
Step No. 1 Adjustment Title TUNED IND. Lighting Level Frequency (kHz) 999 �1
ADJUSTMENT OF AM TUNER SECTION
AM SG (400Hz, ± 30% Mod.) Level (dBµV/m) 47 (± 2dB)
Reception Frequency Display 999kHz �1
Adjustment Location VR6202
Specifications Adjust so that the indicator of TUNED IND. starts to light up.
�1 : For the area using 10kHz step, frequencies should be 1000kHz.
51
|
|
|
> |
|
