|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
 ;
The quality of the manual is top. The transfer worked perfect and fast.
No problems at all. Recommendable
;
Very good service for get any documentation. Fast and perfect quality.
;
Excellent service manual with all the necessary info. :)
;
The product dowload was delivered efficiently with emails to support its download availabilty. The contets of the manual was very eligible and of good quality. Will purchase from this site again!
GB
1.MAINTENANCE INSTRUCTIONS
For service information on the deck mechanism see separate publication <X1000 SERIES MECHANICAL ADJUSTMENTS>.
1.1 Resetting the video recorder
a) Disconnect the video recorder from the mains supply. b) Hold down the <+> and <-> keys on the front panel and reconnect the video recorder to the mains supply. Release the <+> and <-> keys. c) Resetting the video recorder also can be done in the service mode.
1.2 Service mode adjustments
Accessing the service mode a) Press <menu> key on the remote control, then the summary menu is displayed on screen. b) Sequential pressing the numbers as <3> ,<6>, and <9> will display the 5 items of service mode. c) Each service mode can be accessed by pressing the digit key corresponding to the number on the left side. <0> key on the remote control will release the service mode.
1.3 Head switching point
a) Insert a protected test cassette into the video recorder. The VCR will automatically enter the play mode. b) Next enter the service mode as described above. c) Press <5> key on the remote control, then the video control data is displayed. d) Press <Rec> key either on remote control or on the front panel. <0> key on the remote control will release the video control data mode.
5
6
|
|
|
> |
|
