Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 7 (click to view)
Connecting with a scart cable
Connecting without a scart cable
1 Switch off the TV set. 2 Remove the aerial cable plug from your TV set and insert
1 Switch off the TV set. 2 Remove the aerial cable plug from your TV set and insert
it into the
2
socket at the back of the video recorder.
it into the
2
socket at the back of the video recorder.
3 Plug one end of the aerial cable provided into the 3
3 Plug one end of the aerial cable provided into the 3
socket on the video recorder and the other end into the aerial input socket on your TV set.
4 Plug one end of the scart cable into the AV1 EXT1 scart
socket on the video recorder and the other end into the aerial input socket on your TV set.
4 Insert one end of the mains cable into the mains socket
socket at the back of the video recorder and the other end into the suitable scart socket on your TV set (see instruction manual TV set).
5 Switch on the TV set. 6 Insert one end of the mains cable into the mains socket
at the back of the video recorder and plug the other end into the wall socket.
5 Press and hold h on the remote control and while
4
holding that button, press and hold h/J on the video recorder. After several seconds the dipslay on the video recorder will show �M583� or a similar number.
6 Switch on your TV set and select the programme number
at the back of the video recorder and the other end into the wall socket.
7 When the TV has been tuned read the paragraph �Initial
4
that you have chosen for video playback (see instruction manual TV set).
7 Tune in the TV set until this picture appears.
installation� in the chapter �INSTALLING YOUR VIDEO RECORDER�. Note: Many televisions automatically switch to programme number �EXT� (EXTernal) �0� or �AV� (Audio/Video) when a video cassette is played back. If the television does not switch automatically, select programme number e.g.: �EXT�, �0�, or �AV� on the TV set manually.
