|
There are currently no product reviews.
 ;
Excellent printing quality. A complete and very useful manual with all details.
 ;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
;
Mi spiace per non poter scrivere in inglese... ma sono veramente soddisfatto del servizio offerto. Grazie..!!
;
The quality of this manual is good. It has all schematics and setup information for both the MDS-B3 and the MDS-B4. The scan quality is quite good, all pages are readable, This service manual also contains scans of the operating instructions from the User manual.
;
Quick site processing. A complete and very useful manual with all details. Thank you!
DISASSEMBLY INSTRUCTIONS
1-5: DECK SHIELD PLATE (Refer to Fig. 1-5) 1. Remove the 2 screws 1. 2. Remove the Deck Shield Plate in the direction of arrow (A). 3. Remove the screw 2. 4. Remove the Bottom Shield Plate in the direction of arrow (B).
1
Deck Shield Plate
1-7: JACK PLATE AND SYSCON PCB (Refer to Fig. 1-7) 1. Remove the screw 1. 2. Remove the 2 screws 2. 3. Remove the Syscon PCB in the direction of arrow.
Syscon PCB
1 1
(A)
2 2
TV/VCR Block
(B)
Deck Holder
Fig. 1-7
Bottom Shield Plate
2
Fig. 1-5
1-6: DECK CHASSIS (Refer to Fig. 1-6) NOTE Do not remove the cable at the FE Head section. The FE Head may be damaged if you remove the cable by force. 1. Remove the screw 1. 2. Remove the FE Head. 3. Remove the 3 screws 2. 4. Disconnect the following connectors: (CP1001, CP4001, and CP4005). 5. Remove the Deck Chassis in the direction of arrow.
2 2
1
FE Head
2
Deck Chassis
Syscon PCB
Fig. 1-6 B1-2
|
