SONY VX900T
Service Manual

Customizing Your Monitor

Customizing Your Monitor

Adjusting the Settings 1 Adjusting the centering of the picture (CENTER)
This setting is stored in memory for the current input signal.

3 Adjusting the shape of the picture (GEOM)
The GEOMETRY settings allow you to adjust the rotation and shape of the picture. The rotation setting is stored in memory for all input signals. All other settings are stored in memory for the current input signal.

5 Adjusting the color of the picture (COLOR)
The COLOR settings allow you to adjust the picture�s color temperature by changing the color level of the white color field. Colors appear reddish if the temperature is low, and bluish if the temperature is high. This adjustment is useful for matching the monitor�s colors to a printed picture�s colors. This setting is stored in memory for all input signals.

6 Adjusting the quality of the picture (CONV)
The CONV settings allow you to adjust the quality of the picture by eliminating red or blue shadows around letters, characters and lines. Both settings are stored in memory for all input signals.

1 Press the MENU button.
The main MENU appears on the screen.

1 Press the MENU button.
The main MENU appears on the screen.

1 Press the MENU button.
The main MENU appears on the screen. CENTER

1 Press the MENU button. 2 Press the
v/V buttons to highlight and press the MENU button again. The CENTER menu appears on the screen.

2 Press the
COLOR and

2 Press the

v/V buttons to highlight GEOM and press the MENU button again. The GEOMETRY menu appears on the screen.

The main MENU appears on the screen.

v/V buttons to highlight CONV and press the MENU button again. The CONVERGENCE menu appears on the screen.

2 Press the

3 Press the

v/V buttons to adjust the vertical centering, and the 6 B/b buttons to adjust the horizontal centering. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

3 First press the

v/V buttons to select the desired adjustment item. Then press the 6 B/b buttons to adjust the setting. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again. To rotate the picture expand or contract the picture sides shift the picture sides to the left or right adjust the picture width at the top of the screen shift the picture to the left or right at the top of the screen

v/V buttons to highlight press the MENU button again. The COLOR menu appears on the screen.

3 Press the 6 B/b buttons to adjust the horizontal
convergence, or the v/V buttons to adjust the vertical convergence. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

3 Press the

2 Adjusting the size of the picture

Select ROTATION PINCUSHION PIN BALANCE

(SIZE)
This setting is stored in memory for the current input signal.

US

v/V buttons to select a color temperature. The preset color temperatures are 1 (9300K) and 2 (5000K). Since the default setting is 9300K, the whites change from a bluish hue to a reddish hue as the temperature is lowered to 5000K. You can also fine tune the color temperature by selecting in step 2 above, and using the 6 B/b buttons to adjust the color temperature manually.
COLOR 1 2

7 Adjusting the OSD position (OSD)
This setting is stored in memory for the current input signal.

7 �

1 Press the MENU button.
The main MENU appears on the screen.

1 Press the MENU button. 2 Press the

The main MENU appears on the screen. SIZE and

KEYSTONE KEY BALANCE

2 Press the

v/V buttons to highlight

OSD and

v/V buttons to highlight press the MENU button again. The SIZE menu appears on the screen.

press the MENU button again. The OSD POSITION menu appears on the screen.
VARIABLE

3 Press the

v/V buttons to adjust the vertical size, and the 6 B/b buttons to adjust the horizontal size. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

4 Enlarging or reducing the picture (ZOOM)
This setting is stored in memory for the current input signal.

3 Press the
If you are using the Presentation or Graphic/Video mode, the following COLOR OSD appears when � COLOR� is selected.
COLOR

v/V buttons to adjust the vertical position or the 6 B/b buttons to adjust the horizontal position. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

1 Press the MENU button.
The main MENU appears on the screen.

8 Additional settings (OPTION)
You can manually degauss (demagnetize) the screen, lock the controls, change the OSD language, restore the color image, and cancel the moire.

2 Press the

v/V buttons to highlight press the MENU button again. The ZOOM menu appears on the screen.

ZOOM and
VARIABLE

3 Press the right 6 b button to enlarge the picture or the
left 6 B button to reduce the picture. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.
Note Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value.

This OSD allows you to adjust the color temperature between 11,000K to 9,300K. Press the 6 B/b buttons to adjust the color temperature. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

1 Press the MENU button. 2 Press the

The main MENU appears on the screen. OPTION and

v/V buttons to highlight press the MENU button again.

The OPTION menu appears on the screen.

3 Press the

v/V buttons to highlight the desired adjustment item. Adjust the selected item according to the following instructions. The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

VX900T

7

8