|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Excellent manual. In addition to the information I needed was a complete description of both electronic and mechanical devices.
Excellent site.
Thank you very much.
 ;
very good and complete manual , it is in english and german is perfect for repair.
 ;
This manual is complete and of high quality. I am very pleased with the purchase.
 ;
Another excellent buy! A fully readable PDF archive. Good prints!!
 ;
It is wonderful done!!! a great job in scanning the manual. Superior quality in all the electric scheme. Very understandable and net!!! Thank you!
5. Alignment and Adjustment
5-1 Reference
1) X-Point (Tracking center) adjustment, �Head switching adjustment� and �NVRAM option setting� can be adjusted with remote control. 2) When replacing the micom (IC601) be sure to adjust the �Head switching adjustment� and �NVRAM option setting�. 3) When replacing the cylinder ass�y, be sure to adjust the �X-Point� and �Head switching adjustment�. 4) Remote control used for same chassis as a accessory is available for all adjustments. 5) How to adjustment. - Monmently short-circuit the test point on Main PCB with pincets to set the adjustment mode. - If the corresponding adjustment button is pressed, the adjustment is preformed automatically. - If the adjustment is completed, be sure to turn the power off.
5-1-1 Location of adjustment button of remote control
VCR
TV
POWER
1
2 5 8 0
3 6 9
100
VC-513
X-Point (Tracking Center) Adjustment
4 7
A.SELECT
EJECT
PLAY
REW
ENTER
FF
STOP
SLOW
DISPLAY COUNTER
REMAIN/
COUNT RESET
PAUSE/STILL
SP/ SLP
Head Switching Adjustment
I.SELECT
REC
TIMER
TV VOL
PROG.
CANCEL
NVRAM Option Setting
Fig. 5-1 Toshiba 5-1
|
|
 |
> |
|
|
Parse Time: 0.224 - Number of Queries: 125 - Query Time: 0.039