PHILIPS WAC3500D/79
Owner's Manual

5. Basic functions
Helpful hints: To change to 12-hour or 24-hour format � In the Time menu, select Time Format (see the above Step 2) � Press 3 or 4 and 2 to select your option. � The clock setting will not be saved when the set is disconnected from the power supply. Press and hold VIEW button for about 5 seconds. � Clock will be shown briefly on the display. English 5.9.3 Viewing clock

Helpful hint: � In standby mode, you may press VIEW button briefly to turn on the LCD backlight so as to view clock clearly. � Reset clock if the power cord is plugged in again.

5.10 SLEEP
You can preset a certain period of time after which the Center will switch to standby mode.

1 1
5.9.2 Synchronizing clock In the Time menu, select Auto Time Sync

On the remote control, press SLEEP repeatedly to select the desired time period (in minutes): � The display shows in sequence: Sleep 15, 30, 45, 60, 90, 120, Off. � Display shows the selected option briefly and returns to its previous status.The icon ZZ appears. To view the countdown time to standby mode, press SLEEP again

2

� The display shows the preset radio stations

� To deactivate the sleep timer, press SLEEP repeatedly until Sleep Off is displayed � Press STANDBY-ON/ ECO POWER to switch the set to standby (or press y on the remote control)

2

Use the navigation controls 3 or 4 and 2 to select an RDS radio station to synchronize the time.

25