|
There are currently no product reviews.
 ;
everything is ok, thank you very much! Product is good, no problems with download!
;
Great site, I always find all the manuals I need and i can't find anywhere else. PDF for the Sony PCM 3348 is complete and scan is good quality. Thank you!
;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
4gb15170.fm5 Page 16 Thursday, July 11, 2002 11:35 AM
Then: 1. Plug in the appliance. 2. Turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a fault. Turn off the tap and notify After-Sales Service). 3. For models with fault display, select and start the desired programme again. For models with no fault display, continue the programme by pressing the �On/Off� button again. If the fault occurs again, please contact After-Sales Service (see �After-Sales Service�).
�Water Stop� fault when the programme selector switch is in the � � position.
The pump is switched on automatically in order to pump the water out. For models with fault display the washing machine will also detect a Water Stop fault (leak) if the programme selector is in the � � position. In this case the digital display (if one exists) alternately shows �A� and �F�. For models with no fault display, the �Water Stop� fault is detected when the appliance is switched on again. Pull the mains plug out and ensure that the water tap is turned off.
Tilt the appliance forwards carefully to allow the collected water to flow out. Then: 1. Plug in the appliance. 2. Turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a fault. Turn off the tap and notify After-Sales Service).
16
Black Process Plate
|
