|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
4gb15170.fm5 Page 16 Thursday, July 11, 2002 11:35 AM
Then: 1. Plug in the appliance. 2. Turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a fault. Turn off the tap and notify After-Sales Service). 3. For models with fault display, select and start the desired programme again. For models with no fault display, continue the programme by pressing the �On/Off� button again. If the fault occurs again, please contact After-Sales Service (see �After-Sales Service�).
�Water Stop� fault when the programme selector switch is in the � � position.
The pump is switched on automatically in order to pump the water out. For models with fault display the washing machine will also detect a Water Stop fault (leak) if the programme selector is in the � � position. In this case the digital display (if one exists) alternately shows �A� and �F�. For models with no fault display, the �Water Stop� fault is detected when the appliance is switched on again. Pull the mains plug out and ensure that the water tap is turned off.
Tilt the appliance forwards carefully to allow the collected water to flow out. Then: 1. Plug in the appliance. 2. Turn the water tap on (if water immediately flows into the appliance again, without the appliance being started, there is a fault. Turn off the tap and notify After-Sales Service).
16
Black Process Plate
|
|
|
> |
|
