Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 6 (click to view)
The Control Panel
TURBODRY 1 000
FAST COLOUREDS C NON FAST COLOUREDS D WHITES + PREVASH A WHITES B RINSES F FRESHEN UP G SPIN H STORE DRY Kg 2.5 90' Kg 1 60' IRON DRY Kg 2.5 70' Kg 1 50' MIXED FABRICS WOOL WORN ONCE DELICATES RINSES SPIN M
DRYING TIME VARIABLE SPIN PROGRAMME
WDA 1055 W
K P L Q R DRAIN S N N
DRY
ON-OFF
HALF LOAD
J J
STORE DRY SYNTHETICS Kg 2 110' Kg 1 70'
XTRACAPACITY
1
2
3 45 6
7
8
1 Programme guide 2 Drying time selector dial
Graduated up to 120 mins for cottons (black section) and synthetics, (grey section) this dial allows you to select the desired drying time according to the type and quantity of laundry and the required degree of dryness. Turn the dial clockwise only.
7 Spin speed selector dial
This dial allows you to select the desired spin speed or the following options: I = no spin. All the spinning phases are excluded. To be used for items that tend to wrinkle. If position is selected for cotton items (programmes 95°, 60° and 40°), the machine will perform an extra rinse (4 instead of 3). I = Rinse Hold. The water of the last rinse is not emptied out to prevent any creasing in the clothes if they are left damp in the drum. If you select the Rinse Hold option in an automatic washing & drying programme the machine will not dry. The spin speeds on the dial refer to cotton programmes. For mixed fabrics and wool, position 1000 or 1200 corresponds to 850, for delicates 650 rpm. Position 450 corresponds to 350 rpm for delicates.
Cooling phase
To allow the laundry to cool down, a cooling phase starts automatically 10 minutes before the end of drying and this phase must in no circumstances be reduced or interrupted.
3 Drying indicator light
This light illuminates when the machine is drying.
4 Mains-on light
This light illuminates when the machine starts working and goes out when the ON/OFF button is released.
8 Programme selector dial
Turn the dial clockwise to select the required wash and drying programme. Before setting the dial to any position the machine must be switched off by depressing the ON/OFF button again.
5 On/Off button
By depressing this button the machine starts operating. When depressed again, the machine stops.
6 HALF LOAD button
Select this button to reduce water consumption on the rinse cycle when washing a smaller load of cottons or linens (maximum load size = 2.5 kg).
