PANASONIC WJ-FS616
Owner's Manual

OPERATING PROCEDURES
MONITOR CONTROL FUNCTION
Before starting the following procedures, all system components should be turned on. Then set the LOCK switch to the OFF position.

s Operating the Multiscreen Monitor
The following operations are available on the Multiscreen Monitor. Note: We recommend to use the Single Spot when displaying non-interlace pictures, for instance, the Menu screen of the WJ-SX550, to prevent picture disturbance.

s Operating the Spot Monitor
The following operations are available on the Spot Monitor.

q Displaying the Camera Picture
1. Single Spot
1. Press the MULTISCREEN button. The LED (green) on the button lights up.
MULTI SCREEN

q Displaying the Camera Picture
1. Single Spot
1. Press the SPOT button. The LED (green) on the button lights up.
SPOT

2. Press a CAMERA (1 - 16) button to display a selected camera picture on the monitor screen. The LED on the selected CAMERA button lights up.

2. Press the VCR/CAM button to CAM position (LED off).
VCR CAM

3. Press a CAMERA (1 - 16) button to display a selected camera picture on the monitor screen. The LED on the selected CAMERA button lights up.

ENTRANCE

2. Single Still
1. Repeat the step 1 - 3 described above for Single Spot. 2. Press the STILL button to freeze the displayed picture.

2. Spot Sequence
1. Press the SPOT button. The LED (green) on the button lights up. 2. Press the SEQUENCE button to activate the sequence (SEQ1) programmed.
SEQUENCE

STILL

The LED on the SEQUENCE button lights up. Note: Refer to the Sequence Setup on page 31 for more details. 3. Press the SEQUENCE button to move one step forward in the sequence. 4. To cancel the sequence, press the respective CAMERA button again. The selected camera picture is displayed in spot mode. -38-

STILL

The LED on the STILL button lights up, and the LED on the pressed CAMERA button starts to blink. The camera title and �STILL� (both blinking) alternate in the display. 3. To cancel the still picture, press the STILL button again. The selected camera picture is displayed in spot mode.