The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 36 (click to view)
G HDD Safety Mode (HDD SAFETY MODE)
A hard disk drive can be damaged if it is moved and shocked while its motor is revolving. This menu is provided for HDD protection purposes and enables you to stop the motors from starting even when the recorder is being powered. Use this when you cannot switch off the recorder and you have to mount or dismount the units. 1. Move the cursor to HDD SAFETY MODE. 2. Select ON or OFF with the JogDial and press the JogDial. The default setting is OFF. ON: Stops the HDD motors. OFF: Keeps HDD motors revolving. 3. When you select ON, hold down the [SETUP/ESC] button for 2 seconds. The recorder closes the setup menu and enters powerup procedures. 4. A message "DO NOT MOVE HDD" appears when power-up procedures are completed. Wait for about 30 seconds while the green indicators in the numeric buttons 1-8 on the front panel turn on and off every 2 seconds.
*** HDD SAFETY MODE *** DO NOT MOVE HDD! WAIT UNTIL ALL HDD MOTORS STOP. �STILL IN PROCESS FOR STOP�
6. After you mount the units in the rack, move the cursor to ON. Select OFF with the JogDial and press the JogDial. OFF: Escapes from the menu and restarts power-up procedures. A message "SET DONE!" appears on the screen and the recorder enters normal operation when power-up procedures are completed. Note: While HDD motors are stopped, the following inputs will be disabled. � Input events for recording: button operation, VMD and lapse of preset record start time � Inputs to ALARM/REMOTE port: alarm inputs � Hour meter increment
5. A message "ALL HDD MOTORS STOPPED" appears. The indicators 1-8 light up in green for two seconds and in amber for two seconds. Now you can move the units.
*** HDD SAFETY MODE *** ALL HDD MOTORS STOPPED. NOW YOU CAN MOVE UNIT. SELECT OFF AND PUSH JOG TO RESTART.