|
There are currently no product reviews.
 ;
PDF Contains
Technical Data, Mechanical data, Detailed Circuit diagram with components value, PCB layout. Actual PCBs Print. Component List, Spare parts code list and Input output detail. It cover LBB1211, LBB1212, LBB1213, LBB1216, LBB1217.
It is the actual Service Manual for SQ10
;
very good manual with clear electrical schemes. Very helpful to find wat was wrong inside my microwave.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
;
This was super service.Ordered this manual and was reading the download an hour later
;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
SECTION 4 MECHANICAL ADJUSTMENT
1. PRECAUTION Clean the following parts with a denatured-alcohol-moistened swab: playback head pinch roller rubber belts capstan Do not use a magnetized screwdriver for the adjustments.
SECTION 5 ELECTRICAL ADJUSTMENT
TAPE SECTION
Test Tape Tape WS-48A Signal 3 kHz, 0 dB Used for Tape speed adjustment 0 dB = 0.775 V
2.
Torque Measurement Mode Torque Meter FWD FWD Back Tension FF, REW CQ-102C CQ-102C CQ-201B
Meter Reading 20 to 42 g�cm (0.27 to 0.58 oz�inch) More than 2.0 g�cm (More than 0.027 oz�inch) More than 50 g�cm (More than 0.69 oz�inch)
Tape Speed Adjustment Procedure: Mode: Playback
Test tape WS-48A (3 kHz, 0 dB) 16 � + � digital frequency counter
Set
J301 (phones)
Adjustment Value: normal tape speed Adjust the tape speed adjustment RV601, so that the freqency counter reading becomes 3,000Hz. Specification Value: Digital frequency counter 2,970 to 3,030 Hz Frequency difference between the beginning and the end of the tape should be within 1.5 % (45 Hz). Adjustment Location:
RV601
�7�
|
