|
There are currently no product reviews.
 ;
About one hour after checkout, the manual was available for download. Clear reading and detailed. Thanks
;
Excellent transaction - clean document received - Thanks a lot
;
Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
 ;
We received the manual in a timely manner and it was exactly what we were expecting.
;
Excellant, finally this is want I need and searching for The service manual is fantastic and thank you to owner-manuals.com and its service. Price is reasonable. It's a bit slow on my end in downloading but manage to receive the whole manual without a break. once again, thanks.
SECTION 3 DISASSEMBLY
Note :
Set
Disassemble the unit in the order as shown below.
Case assy Belt Lid block assy, cassette Motor (M601) Holder (F) assy Ornament, reel Lever (N)/(R) assy, pinch Main board Head, magnetic (HP901)
Note :
Follow the disassembly procedure in the numerical order given.
3-1.
CASE ASSY
S11
S501
knob (ISS) Note: When assembling the case assy, align the knob (ISS) with the position of S501. S2
Claw 1 Lid, Battery
2 Two screws (M1.4 � 2.0)
knob (REC) Note: When assembling the case assy, align the knob (REC) with the position of S11.
5 Remove the case assy in the direction of the arrow. 3 Screw (M1.4 � 2.0) 4 Two screws (M1.4 � 2.5) knob (HOLD-B) Note: When assembling the case assy, align the knob (HOLD-B) with the position of S2.
�6�
|
