|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
 ;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
;
The manual is of better quality compared to other. I found it less expensive and therefore it it is the best buy cost vs quality.
;
I bought the service-manual of the sony ICB-1020(an old transmitter-receiver) at "www.Owners-Manual.com", I found the service-manual for a fairly cheap price(in comparison with other sellers). I filled in some questions, payed the order with Ideal, and within 24 hours I had my service manual. I was very happy:In no time I had my service-manual and everything, but literally everything was noted down in the manual; the electronic scheme, the parts list, etcetera.
A very practical, reference-document.
(12)Connect the signal generator to the ANTENNA A connector with DC cut fixture. Set the FREQUENCY (carrier frequency) of the signal generator as follow. FREQUENCY (carrier frequency): 800.000 MHz (13)Check first that indication �L� of �AC2L� on the LCD has disappeared, and then press the �SET� button on the front panel. (14)Indication on the LCD appears as follows: LCD:
(21)Connect the signal generator to the ANTENNA B IN connector with DC cut fixture. (22)Check first that indication �L� of �BC3L� on the LCD has disappeared, and then press the �SET� button on the front panel. (23)Indication on the LCD appears as follows: LCD:
U68
(U68)
B C2 L
(B C2 L)
Adjustment is completed. (Normal operation mode)
(15)Connect the signal generator to the ANTENNA B IN connector with DC cut fixture. (16)Check first that indication �L� of �BC2L� on the LCD has disappeared, and then press the �SET� button on the front panel. (17)Indication on the LCD appears as follows: LCD:
A C3 L
(A C3 L)
(18)Connect the signal generator to the ANTENNA A connector with DC cut fixture. Set the FREQUENCY (carrier frequency) of the signal generator as follow. FREQUENCY (carrier frequency): 804.000 MHz (19)Check first that indication �L� of �AC3L� on the LCD has disappeared, and then press the �SET� button on the front panel. (20)Indication on the LCD appears as follows: LCD:
B C3 L
(B C3 L)
3-4
WRR-800A
|
|
|
> |
|
