Configure the detailed settings
The following are descriptions of how to edit the camera title, adjust white balance, etc. on the detailed setup menu.
The camera title can be edited and displayed on the screen
The camera title can be edited and displayed on the screen. Up to 16 characters are available for the camera title.
Step 1 Select "ON" for "CAMERA ID" on the "CAMERA SETUP" page. � The camera ID edit page will be displayed.
CAMERA ID 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ().,'":;&#!?= +-*/%$ SPACE POSI RET TOP END RESET ................
Step 3 When completing the camera title edit, press the [SET] button after moving the cursor onto "POSI". � The camera title display position setting window will be displayed.
FLOOR 1
Entry (edit) area
Step 2 Move the cursor onto the desired character and press the [SET] button. � The selected character will be displayed at the bottom of the page. <About character entry> � To edit the entered character, move the cursor onto the desired character and press the [SET] button. The arrow mark will move under the selected character. Enter the desired character for the selected character. � To enter a blank (space), press the [SET] button after moving the cursor onto "SPACE". � To delete all characters, press the [SET] button after moving the cursor onto "RESET".
Step 4 Determine the position where the camera title is to be displayed, and press the [SET] button. � The camera title and the display position will be applied.
56
