|
There are currently no product reviews.
 ;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Content A4 and A3 format pages. Exactly what I needed to restore my old receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this receiver.
WX-4500X
DOLBY Level Adjustment Setting : Light down mark ; (DOLBY OFF)
test tape P-4-D400 (400 Hz, 0 dB)
level meter
set main board TP-L TP-R
Procedure : 1. Set the FWD play mode. 2. Push the MENU button and rotate the jog roller to display �NR�. Then press � � � on the SEEK/AMS button to select �NR off�. (Dolby off) 3. Adjust RV400 for L-ch and RV401 for R-ch so that the level meter reads �6 ±0.5 dB (0.37 to 0.41 V). Adjustment Location :
Dolby level adjustment (L-CH) -MAIN BOARD(SIDE A) Dolby level adjustment (R-CH)
-MAIN BOARD(SIDE B)
TP-R
TP-L
Dolby level adjustment
21
|
