This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
Helpd me mont a new carradio when prewius mont was a mess.
Text excerpt from page 84 (click to view)
XDV-P9
7.1.2 DISASSEMBLY
- Removing the Upper Case (not shown) 1. Remove the eight screws. 2. Remove the upper case. - Removing the DVD/CD Mechanism Unit
DVD/CD Mechanism Unit
(Fig.1)
Remove the two screws. Remove the four dampers. Remove the two springs. Disconnect the connector and then remove the DVD/CD mechanism unit. - Removing the Grille Assy (Fig.1) Disconnect the connector Fig.1 Remove the four screws and then Remove the Grille Assy. Grille Assy
Stopper - Removing the Extension Unit (Fig.2) Remove the screw. Remove the five screws. Remove the three screws and then remove the stopper. Disconnect the connector and then remove the extension unit.