|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
 ;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
;
The manual is of better quality compared to other. I found it less expensive and therefore it it is the best buy cost vs quality.
;
I bought the service-manual of the sony ICB-1020(an old transmitter-receiver) at "www.Owners-Manual.com", I found the service-manual for a fairly cheap price(in comparison with other sellers). I filled in some questions, payed the order with Ideal, and within 24 hours I had my service manual. I was very happy:In no time I had my service-manual and everything, but literally everything was noted down in the manual; the electronic scheme, the parts list, etcetera.
A very practical, reference-document.
XG-P10XE
TROUBLE SHOOTING TABLE (Continued)
Checking the video system
Is the lamp on?
No
Yes
Go to "Lamp fails to light-up". Is specified voltage fed to EA connectors?
No
Yes
Check the power circuit and its parts. Are there signal inputs at pins (7), (9) and (25) of SC401?
No
Yes
Are there signals at pin (4) of IC6011? Are there signal outputs at pins (7) of IC6010 and (5) of IC6009?
Yes
No
Yes
No
Check IC6001, IC6010, IC6009 and their peripheral circuits as well as switching circuit.
Check the video unit circuit (IC4501 and IC4001 and its peripheral circuits).
Check the oscillation circuit of IC6011, and their peripheral circuits.
Go to "Checking IC801 (RGB signal output circuit)".
Checking the video unit circuit
Is there video signal output at pin (7) of IC401?
No
Yes
Check the IC401 selector switch, terminal voltage and input circuit.
Is there video signal input at IC4001?
No
Yes
Check the low-pass and buffer circuits of Q4002 thru Q4012.
Are there signal outputs at pins (6) and (8) of IC4001?
No
Yes
Check IC4001 and its peripheral circuits (bias).
Check the low-pass and buffer circuits No of Q6002 thru Q6008. Is the signal as specified?
Yes
Check Q4007 thru Q4009 and their peripheral circuits.
Go to "Checking IC801 (RGB signal output circuit)".
34
|
|
|
> |
|
