|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
;
Purchased the manual that I was looking for at a great price and could download it easily.. Great service experience and for future purchases I plan to use the site.
Thank you very much
;
Exactly what was needed to assess the product - excellent value and great service
XL-45H
� HF error.
Is output (tracking error signal) obtained at the pins 33 (TE) and 37 (TRCRS) of IC801 the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" test mode "step 5"
No
Is output obtained at the pins 2 and 5 of CNS802 No Yes Check the periphery of IC802. Check the PWB pattern between pin 20 (TEOUT) of IC802 and pins 33 and 37 of IC801. Is it normal ? Yes
Optical pickup failure.
IC801 is faulty. No
TE TRCRS
Check the PWB pattern between pin 33 (TE) of IC801 and pin 19 of IC804. Check the periphery of IC804 and CNW801/CNS801. If OK. Optical pickup failure. Is output (HF signal) obtained at the pin 44 (ARF) of IC801 when the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" ARF test mode "step 5"
No
Is output obtained at the pins 1 and 3, 4 of CNS802. No Yes
Optical pickup failure.
Check the periphery of IC801. Check the PWB pattern pin 44 (ARF) of IC801. If OK. IC802 is faulty
Is output (HF signal) obtained at the pin 38 (/RFDET) of IC801 when the CD TEST MODE "STEP 4" is changed to "STEP 5"? Yes
test mode "step 4" test mode "step 5"
No
Check the periphery of IC801. Check the PWB pattern pin38 (/RFDET) of IC801. If OK. IC802 is faulty.
/RFDET
Is the following wave output to the pin 10 (VIN2) of IC804 when the CD TEST MODE "STEP 4" or "STEP 5"? Yes
VO2 test mode "step 4" test mode "step 5"
No
Check the periphery pins 52~53 of IC801. If OK. IC801 failure.
Normal.
� No sound.
No sound from both L and R-ch? No Yes No Is signal of pins 73 and 75 of IC801 output? Yes Check the peripheral parts of IC801. If OK, IC801 is faulty. Check the interval between the pins 73 or 75 of IC801 and the pins 1 or 3 IC601.
The main PWB is faulty.
� 39 �
 $4.99 XL-45H SHARP
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
