There are currently no product reviews.
;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
BASIC OPERATIONS
Preparation for playing
Turn on the television set, amplifier or receiver to which the Player is connected, and then select the proper channel and mode to operate the Player, and set the sound volume to a reasonable level. Press the POWER button on the front panel or remote control.
ON/STANDBY
Starting to play disc(s)
Press the 3 SELECT (PLAY) button. The Player starts to play from the disc indicated in the Display window. Press one of the DISC 1 through 3 buttons and the Player plays the disc you pressed, from the 1st track. For individual track selection, use the number keys or the 4/ ¢ PREV/NEXT buttons.
SELECT
STANDBY
POWER
or
The STANDBY indicator goes out.
The display window shows the initial information as shown below. When you start play, the Display window shows disc number and the track number being played. During play, the indicator on the DISC button blinks. If the PBC function is activated, the display window shows �Pb� until you play a track, and the television screen shows the initial menu, DISC number, and �PBC�. See page 18, �Operation of Playback Control function�. When you press 3 SELECT button during play, the disc will restart from the beginning of the track except when the PBC function is activated.
Easy start up Without pressing the POWER button you can start up the Player by pressing 3 SELECT button or disc buttons.
Inserting/removing the disc(s)
Press the 0 (OPEN/CLOSE) button (1 through 3) to open the disc tray. Then place the disc in the round recess of the tray with label side up. To close the tray, press the 0 (OPEN/CLOSE) button again. If you press the 0 (OPEN/CLOSE) button of the playing disc, the Player stops and then opens the tray. If you press the 0 (OPEN/CLOSE) button of a disc that is not being played, you can change discs without stopping play.
Using number keys
Press the number keys to select numbers. On the Player .................... 1 to 20 and +20 key Example: For number 5, press 5. For number 15, press 15. For number 32, press +20 button, then 12. For number 42, press +20 twice, then 2.
1 6 11 16 2 7 12 17 3 8 13 18 4 9 14 19
+20
5
10 15 20
Notes � When loading a disc in the disc tray, be sure to position the disc inside the recess. Otherwise, the disc will be damaged when the disc tray is closed, and the disc cannot be removed from the unit.
On the remote control ..... 1 to 10 and +10 key Example: For number 5, press 5. For number 15, press +10, then 5. For number 20, press +10, then 10. For number 32, press +10 three times, then 2.
1 5 9 2 6 10 3 7 +10 4 8
CD
Tray
CORRECT
INCORRECT
Note When you press number keys, track will start playing without pressing 3 SELECT button.
Page 7
English
