|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Delivery came quite promptly and in a very readable format. Thank you.
;
I found my Clarion VRX8370R in the Camper I bought and I wasn't able for month to understand it.
The Owner Manual was perfect and just what I was searching for.
Thank you.
Leonardo
;
Very good copy of Manual, clear and easy to print off, arrived very promptly and reasonably priced.
Thanks, I will use you again.
;
Zeer duidelijke afdrukken op A4-formaat , zeer uitgebreide handleiding . Pluspunt ,zeer snelle
respons van jullie , binnen de 24h . Top !!!
;
I AM HIGHLY IMPRESSED BY THE EASE OF USE OF THIS DOWNLOAD SERVICE. INSTRUCTIONS ARE CLEAR AND SIMPLE TO FOLLOW....EVEN BY TECHNOPHOBES SUCH AS MYSELF. THE EMAILS POINT YOU IN THE RIGHT DIRECTION...ITS SO EASY PEASY. THE DOWNLOAD CHOICE OF USER MANUALS IS EXTENSIVE AND I COULD NOT FIND A CHEAPER OR MORE EFFICIENT SERVICE ON THE INTERNET. I COULD NOT HAVE MADE A BETTER CHOICE OF INFORMATION PROVIDER. SHOULD I EVER NEED ANOTHER USER MANUAL, THEN THIS IS THE FIRST CHOICE SITE. COULD NOT BE BETTER PLEASED!!!!!!!...MANY THANXES FROM JIM BURNS
2000 MOBILE PRODUCT GUIDE � PART 2
XM-1002HX
2/1 Channel Amplifier
� � � � �
100 W x 2 Ch at 0.04% THD 280 W x 1 Ch at 0.1% THD 140 W x 2 into 2 ohms at 0.1% THD Discrete Dual Differential Inputs Discrete MOSFET Outputs
� � � � �
MOSFET Switching Power Supply Switchable Hi Power/Hi Current Mode Variable 50-200 Hz Hi-Pass/Lo-Pass Filter 40 Hz EQ Boost, Hi Level In RCA Passthrough
Specifications Circuit System
OTL (output transformerless) Circuit Pulse Power Supply RCA Pin Jacks High Level Input Connector Speaker Terminals � through out pin jacks 1-8 ohms (stereo) 2-8 ohms (when used as bridging amplifier)
Inputs
Outputs Speaker Impedance
Rated Outputs (at 14.4 VDC) Hi-Current/Hi-Voltage:
50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 � ) 70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 � ) 140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 � )
Frequency Response Harmonic Distortion Input Level Adjustment Range High-Pass Filter Low-Pass Filter Low Boost Power Requirements Power Supply Voltage Current Drain
5-50 Hz (+0.5/-3 dB) 0.005% or less (at 1 kHz, 4 �) 0.2-4.0 V (RCA pin jack); 0.4-8.0 V (High level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40Hz) 12 V DC car battery (negative ground) 10.5-16 V At rated output: 26A (4 ohm hi voltage mode) Remote input: 2 mA Approx. 282 x 50 x 320 mm (111/8 x 2 x 12 5/8 in.) (not incl. projecting parts and controls) 3.3 kg (7 lb. 4 oz.) (not including accessories) Mounting Screws (4); Terminal Cap (1)
Dimensions (w/h/d) Weight Supplied Accessories
22
Design and specifications subject to change without notice.
|
|
|
> |
|
