|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
2000 MOBILE PRODUCT GUIDE � PART 2
XM-1002HX
2/1 Channel Amplifier
� � � � �
100 W x 2 Ch at 0.04% THD 280 W x 1 Ch at 0.1% THD 140 W x 2 into 2 ohms at 0.1% THD Discrete Dual Differential Inputs Discrete MOSFET Outputs
� � � � �
MOSFET Switching Power Supply Switchable Hi Power/Hi Current Mode Variable 50-200 Hz Hi-Pass/Lo-Pass Filter 40 Hz EQ Boost, Hi Level In RCA Passthrough
Specifications Circuit System
OTL (output transformerless) Circuit Pulse Power Supply RCA Pin Jacks High Level Input Connector Speaker Terminals � through out pin jacks 1-8 ohms (stereo) 2-8 ohms (when used as bridging amplifier)
Inputs
Outputs Speaker Impedance
Rated Outputs (at 14.4 VDC) Hi-Current/Hi-Voltage:
50/100 W x 2 (20-20 kHz, 0.04% THD), at 4 � ) 70/140 W x 2 (20-20 kHz, 0.1% THD), at 2 � ) 140/280 W x 1 (20-20 kHz, 0.1% THD), at 4 � )
Frequency Response Harmonic Distortion Input Level Adjustment Range High-Pass Filter Low-Pass Filter Low Boost Power Requirements Power Supply Voltage Current Drain
5-50 Hz (+0.5/-3 dB) 0.005% or less (at 1 kHz, 4 �) 0.2-4.0 V (RCA pin jack); 0.4-8.0 V (High level input) 50-200 Hz, -12 dB/oct 50-200 Hz, -12 dB/oct 0-10 dB (40Hz) 12 V DC car battery (negative ground) 10.5-16 V At rated output: 26A (4 ohm hi voltage mode) Remote input: 2 mA Approx. 282 x 50 x 320 mm (111/8 x 2 x 12 5/8 in.) (not incl. projecting parts and controls) 3.3 kg (7 lb. 4 oz.) (not including accessories) Mounting Screws (4); Terminal Cap (1)
Dimensions (w/h/d) Weight Supplied Accessories
22
Design and specifications subject to change without notice.
|
|
|
> |
|
