|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
Recording
An audio signal from a variety of sources can be recorded by using either digital or analog input as required.
Things to know before recording ����������
� It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic embodied therein. Carefully read the �Rule on Digital Copying� on page 33. The MD recorder supports the following sampling frequencies for digital sources and lights the sampling frequency being received on the display. 32 kHz, 44.1 kHz and 48 kHz Recording level adjustment: When recording through a digital input terminal, the recording level is automatically set correctly. When recording through an analog input terminal, it is necessary to adjust the recording level properly. The accidental erasure protect tab is provided on the back of an MD cartridge to prevent accidental erasure or recording. It must be set to the close position before recording. Otherwise, �DISC PROTECTED� will appear when you try to record a signal to the MD. Accidental erasure protect tab
Close Open
� �
�
�
For recording or editing
For protecting erasure
� � �
When you stick an adhesive label onto the MD cartridge, adhere it securely. If it peels off, ejection trouble, etc. will occur. Be sure that the MD is not of Playback-only type. (See �Two disc types� on page 34.) Be sure that the MD has enough space for recording. If not, carry out ALL ERASE or ERASE function to erase all the tracks or unwanted tracks in the MD. You can check the recordable remaining time of the MD. (See �To display the remaining recording time� on page 16.)
Recording operation
1 Load a recordable MD. 2 Press ¶ REC PAUSE on the main unit or ¶ on the remote control unit.
OR
The MD recorder enters Rec/Pause mode. The REC and 8 (Pause) indicators light up and the first track to be recorded is displayed. Also, the disc indicator lights in red. Example) When 14 tracks are already recorded
The first track to be recorded
REC
14
|
|
|
> |
|
