|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
very good quality readable manual,printed off very well.
 ;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
 ;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
X-MDX717, XR-MDX717
2-A1. (The laser does not radiate.)
A1
Are when playing, 36 pins of IC801 2.8V or more?.
NO
Please check the circuit of IC801 of 36 pins in the surrounding. Please check a digital signal of 20, 21 and 22 pins of IC801.
YES
Please check the circuit of Q801 in the surrounding. Please check FFC connector (CN801). Q802 is broken. Picking up is broken.
2-A2. (Is the lens vertical motion.)
A2
Fig. 6 NO Fig. 7
Is the wave forms of Figure 6 shown with 13 pins and 16 pins of CN801?.
YES
Is the wave forms of Figure 7 shown with 6 pins (FEO) of IC801?.
NO
YES
Please check the FFC connector from pick-up. Pick-up is broken.
Please check the circuit of IC801 , IC803 in the surrounding. IC803 is broken.
Please check the circuit in the surrounding with the solder of IC801 of 17 pins. IC801 is broken. IC802 is broken.
67
|
|
 |
> |
|