|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
XP-SN70
TEST MODE
The software version display and LCD test can be performed when the test mode is activated. Procedure: 1. Confirm the set is not powered on. (Remove two batteries and disconnect the AC power adaptor.) 2. Short the solder land SL806 (TEST) on the MAIN board. 3. Turn on the main power. (Insert two batteries.) 4. Microcomputer version is displayed for about a second. 5. After that all segments of the liquid crystal display are turned on. 6. Turn off the main power. (Remove two batteries.) 7. Open the solder land SL806 (TEST) on the MAIN board. Note : The solder should be removed clean.
MAIN BOARD (SIDE A)
IC601
IC802
IC701
IC801
SL806 (TEST)
4
 $4.99 XP-SN70 AIWA
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
