|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Excellent printing quality. A complete and very useful manual with all details.
;
Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
;
Very good quality original datasheet!I like this amazing website!!!!!!
 ;
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
;
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
Pin No. 73 74 75 76 77
Pin Name VDD5V VSS CONT6 CONT7 V/*P
I/O � � I/O I/O O
Description Microprocessor interface power supply. (2000pF or more path controller to be inserted at a point nearer to the pin between this pin and GND) Digital ground pin. Must be connected to 0V. General-purpose input/output pin 6. General-pirpose input/output pin 7. Rough servo/phase control automatic switching monitor output pin. �H� for rough servo and �L� for phase servo. Synchronization signal detection output pin. Outputs a high level when the
78
FSEQ
O
synchronization signal detected from the EFM signal and the internally generated synchronization signal agree.
79 80
DEFECT EFMO
I/O O
Defect pin. Which becomes an input pin after reset and can be controlled externally. This becomes the defect monitor pin under control by command. EFM signal output pin.
18
|
|
|
> |
|
