|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
have download a number of manuals todate , most are excellant, one or two sometimes a little difficult to read but a least avaialable, great site .
Brad.
;
Excellent had everything I wanted, very happy with purchase
 ;
This service is relatively cheap, document is fast available, schematic is readable.
Thanks.
;
So far I´m a satisfied customer. I have only downloaded "TECHNICS SX-KN470 Service Manual" maybe I will use it later.
Best regards
Peter
;
Good manual. It is complete and of high quality, both text and graphics. The schematics are with the original big size, so it can be viewed or printed without any loss of resulution and sharpness.
3-2. Checking the IVR, EFB, Focus/Tracking/Sled Gains of the MO Disc
� Adjustment procedure 1) Move the pickup to the center track or around the center track of a disc using the B.SKIP and F.SKIP keys. 2) Press the PLAY key to display �FOCUS ON!�. 3) Press the ENTER key to switch the mode to �ALL SV ON�. 4) Press the STOP key and press the DISPLAY key twice. Confirm that the indication value on the display �I$**:E$!!� is within the range as follows. (hexadecimal) I$ �**� ........................................... 03 to 09 E$ ���� ........................................ 09 to 15 5) Press the DISPLAY key again. Confirm that the indication value on the display �f**t##s!!� is within the range as follows. (hexadecimal) f �**� ............................................. 1A to 45 t �##� ............................................. 15 to 40 s �33� .......................................... 15 to 40 6) After the adjustment is complete, press the STOP key to display �ALL SVoFF�.
3-3. Adjusting the PIT Disc
� Adjustment procedure 1) Load the TGYS-1. 2) Press the MODE (MD) key to display �SEL PIT�. 3) Press the MD function key to display �AUTO ADJ�. After the adjustment is complete, �DONE� is displayed. (If �FAILD� is displayed, it shows that the adjustment has failed.) 4) After the adjustment is complete, press the STOP key to display �ALL SVoFF�.
3-4. Checking the IVR, EFB, and the Focus/Tracking/Sled Gains
� Adjustment procedure 1) Move the pickup to the center track or around the center track of a disc using the B.SKIP and F.SKIP keys. 2) Press the PLAY key to display �FOCUS ON!�. 3) Press the ENTER key to switch the mode to �ALL SV ON�. 4) Press the STOP key and press the DISPLAY key twice. Confirm that the indication value on the display �I$**:E$!!� is within the range as follows. (hexadecimal) I$ �**� ........................................... 14 to 19 E$ ���� ........................................ 09 to 15 5) Press the DISPLAY key again. Confirm that the indication value on the display �f**t##s33� is within the range as follows. (hexadecimal) f �**� ............................................. 1A to 45 t �##� ............................................. 15 to 40 s �33� .......................................... 15 to 40 6) After the adjustment is complete, press the STOP key to display �ALL SVoFF�.
Focus Gain
Tracking Gain
Sled Gain
65
|
|
|
> |
|
