|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
 ;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
 ;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
 ;
Fast and courteous service. Product delivered as described. Thank you.
Installation/Installation
Precautions
�Be careful not to operate the speaker system with the power exceeding its handling capacity. �Keep recorded tapes, watches, and credit cards, etc. with magnetic coding away from the speaker system to prevent damage caused by the magnets in the speakers. �When installing the unit, be careful not to damage the diaphragm by hand or tools. �The subwoofer is heavy, so attach it firmly to a solid thick, baffle plate or metal board. �Make a woofer box, using wooden boards at least 19 mm (3/4 in.)-thick.
1
1
XS-L1235D4: ø279 (11) XS-L1035D4/L1035D6: ø235 (9 3/8�)
Unit: mm (in.) Unité : mm (po.)
Précautions
�Veillez à ne pas faire fonctionner le système de haut-parleurs à une puissance qui dépasse sa charge nominale efficace. �Gardez les cassettes enregistrées, les montres et les cartes de crédit, etc., à codage magnétique à l�écart du système de hautparleurs de manière à éviter tout dommage causé par les aimants intégrés dans les hautparleurs. �Lorsque vous installez l�appareil, veillez à ne pas endommager le diaphragme avec les mains ou un outil. �Comme le subwoofer est lourd, fixez-le sur une planche pour baffle épaisse et robuste ou sur une plaque métallique. �Construisez un caisson de haut-parleur avec des planches d�au moins 19 mm d�épaisseur (3/4 po.).
x
ø3.2 (5/32�)
2
Speaker cord (not supplied) Cordon de haut-parleur (non fourni) Red ring: e Black ring: E Bague rouge: e Bague noire: E
Unit: mm (in.) Unité : mm (po.)
Speaker cord Cordon de haut-parleur
Example Exemple
When making a parallel connection Speaker impedance is 2 ohms (XS-L1235D4/L1035D4) Speaker impedance is 3 ohms (XS-L1035D6) Connexion parallèle Impédance du haut-parleur 2 ohms (XS-L1235D4/L1035D4) Impédance du haut-parleur 3 ohms (XS-L1035D6) When making a serial connection Speaker impedance is 8 ohms (XS-L1235D4/L1035D4) Speaker impedance is 12 ohms (XS-L1035D6) Connexion en série Impédance du haut-parleur 8 ohms (XS-L1235D4/L1035D4) Impédance du haut-parleur 12 ohms (XS-L1035D6)
Parts List/Liste des composants
1 2 3
3
3
2
3
ø5 � 35 �8
1 1
(/ 7 1
�)
6
|
|
 |
> |
|