|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
;
The manual was very helpfull, it answerdes all my questions, and i was surprized to find the original manual on this site! Big thumbs uP:)
 ;
helpful manual.good service.Quick response.will use again
;
Speedy confirmation to my order , with elaborate instructions .
Item Email , received immediately as desired by me.
A Pleasant & Satisfying Transaction.
;
I was searching for this manual at last i got it from this web
Editing MDs
10
� You cannot combine tracks recorded in different recording modes (for example LP2 and stereo); and you can't combine tracks if one was recorded via the digital input and the other was recorded via the analog input. � If both the tracks are named, then the new single track takes the name of the first track. If only one track is named then the new track takes that name. � Combining tracks that have been recorded in LP4 can result in a audible �click� where the track has been joined. � Make sure random and program play are off before starting. 1 During playback of the later track of the two, press 8 (remote) or MD 6 (front panel) to pause playback. Combine only works with two consecutive tracks, so if you wanted to combine tracks 3 and 4, pause during playback of track 4. 2 Press SYSTEM MENU and use the / (cursor up/down) buttons to select MD MENU, then press ENTER.
4 Press ENTER again to combine the tracks.
� To cancel the edit press 7 instead.
Moving tracks on a disc
Use this feature to change the position of tracks on a disc. This is especially useful for setting up consecutive tracks for groups (see also About groups on page 43).
� Make sure random and program play are off before starting. 1 Select the track you want to move. The easiest way to do this is by using the 4 and ¢ buttons while the MD is stopped. 2 Press SYSTEM MENU and use the / (cursor left/right) buttons to select MD MENU, then press ENTER.
3 Use the / (cursor left/right) buttons to select COMBINE, then press ENTER.
3 Use the / (cursor left/right) buttons to select MOVE, then press ENTER.
English
53
En
|
|
|
> |
|
