PIONEER XV-DV505/NVXJN
Owner's Manual

Adjusting the sound

08

Adjusting the bass and treble
� Default setting (U.S. model only): TREBLE: 0db BASS: 0dB � Default setting (all other models): TREBLE: �2dB BASS: 0dB To help you get the sound you want you can increase or reduce the bass and treble. 1 Press SOUND MODE. Make sure that the MIDNIGHT and QUIET modes are off when you do this. 2 Use the / (cursor left/right) buttons to select BASS or TREBLE. 3 Use the / (cursor up/down) buttons to adjust the sound. The bass and treble can be adjusted from -3 to +3. 4 Press ENTER to confirm.

3 Use the / (cursor up/down) buttons to adjust the effect level. The DSP effect level can be adjusted from 10 (min) to 90 (max). 4 Press ENTER to confirm.

� This doesn�t work with the 5-Channel Stereo or the Virtual SB mode.

Boosting the bass level
� Default setting: OFF If you want to bring up the low end for certain kinds of music or sound sources, you can use the bass mode to do so. � Press BASS MODE repeatedly to choose an option that fits the source you�re listening to. � MUSIC - Can be used with music to give a deeper bass sound � CINEMA - Good for action movies or movies with lots of sound effects � P. BASS - Can be used with music sources to bring the beat of the music (or soundtrack) to the forefront � OFF

Adjusting the effect level
� Default setting: 70 You can adjust the effect level of the Advanced Surround mode to get the sound that you want. 1 Press SOUND MODE. Make sure that the ADVANCED SURROUND mode is on when you do this. 2 Use the / (cursor left/right) buttons to select EFFECT.

English

� You can�t use the bass mode when the headphones are connected. Not applicable to the European model: � The default setting for multi-channel (5.1 channel) listening is CINEMA.

47
En