|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1
2
3
4
5 Tray panel
A
Firstly remove the tray panel to remove the mecha. section. In this section, explain a disassembly of the tray panel.
How to open the tray when the power cannot be on
Insert a screwdriver (small) into the slit located at the bottom of the unit, and slide the projection of the drive gear in the LOADING MECHA. Assy in the direction of the arrow, as indicated in the photo. If the tray pops out a little, fully pull it out by a hand.
1 2 3 4 5 6
B
Remove the top panel and top plate. (See Step ¥.) Press the STANDBY/ON button to turn on the power.
Press the 0 (OPEN/CLOSE) button to open the tray. Remove the tray panel. Press the 0 (OPEN/CLOSE) button to close the tray. Press the STANDBY/ON button to turn off the power.
Slit
26
4
C
Tray
35
Screwdriver (small)
3
5
Tray panel
7
Disassembly of after step 7, refer to "Step [ DVDM Assy" . Projection
Screwdriver (small)
D
Drive gear LOADING MECHA. Assy
E
F
108
1 2
XV-DV99
3 4
|
|
|
> |
|
