|
There are currently no product reviews.
 ;
Wonderful job clear. Qick fantastic. These people are really good. If even a problem arise they are wonderful assisting you. These scheme is so net despite this is a very old TV. Thank you for everything!!!!!!!!
;
Detailed schematic diagram, manual for professionals
;
Good service manual,exploded view,adjusment and test point locations,head alignment,mechanical checks and adjusments,all perfect.
;
Block diagram,play rec block diagram,adjusments, it's a very good well done repair manual.
;
Very clear copy of the philips service manual. Fast delivery. Thank you very much
XV-E111SL/XV-E112SL
Removing the rear panel (see Fig.5)
*Prior to performing the following procedure, remove the top cover. 1.Remove the eight screws E attaching the rear panel on the back of the body. E Fig.5 Hook d F Hook c
Front panel assembly
Rear panel
E
E
Removing the front panel assembly (see Fig.6,7)
* Prior to performing the following procedure, remove the top cover. * There is no need to remove the mechanism assembly. 1.Remove the one screw F attaching the front panel assembly on the bottom chassis. 2.Disconnect the wire from CN702 and CN703 on the main board respectively.
Hook d Fig.6 CN702
Mechanism assembly 3.Hook c and d are removed respectively, and the front panel assembly is removed. CN703
Main board Fig.7
Removing the main board (see Fig.8)
* Prior to performing the following procedure, remove the top cover, mechanism assembly and rear panel. 1.Disconnect the wire from CN702 and CN703 on the main board respectively. 2.Remove the four screws G attaching the main board on the bottom chassis.
CN703
G Main board
G
CN702
G
Fig.8
G
1-7
|
