|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Impressively thorough. Even the simple operators manual helped me "fix" one of the 2 CD players in the unit. This unit reads CD's from the top so they should be installed in the magazines "upside down" from typical CD players. The CD player service manual helped me unjam a stuck carriage because somebody transported the box laying down loaded with CD's. A little lens cleaning & the player now works well! Thanks for you help at a great price! Joe
;
I was skeptical at first but later found the manual to be good quality for the price. It took a couple hours to receive the email with the download link, well worth the wait. Thanks.
;
very helpful, I could not have cleaned motherboard and replaced the main fan without it
 ;
Good manual, schematics nice and clear with good quality scanning. Woul dhave been nice to have immediate access after purchasing though.
;
I was very glad recieving the service manal from You. Manuals were delivered promptly and were correct as advertised. A complete and very usefull service manual with all details. Thank you!
XV-FA900BK/XV-FA902SL
SECTION 2 Disassembly method
2.1 Main body 2.1.1 Removing the top cover (See Fig.1) (1) Remove the four screws A on each side of the body. (2) Remove the two screws B on the back of the body. (3) Lift the rear part of the top cover and remove in the direction of the arrow while pulling both sides of the top cover outward.
Fig.1 2.1.2 Removing the front panel assembly (See Fig.2 and 3) � Prior to performing the following procedure, remove the top cover. (1) Disconnect the card wire from connector CN801 and CN803 on the servo control board, and CN951 on the power board respectively. (2) Remove the three screws C on the upper side of the body. (3) Remove the three screws D on the bottom of the body. Remove the front panel assembly toward the front.
Fig.2
Fig.3
7
|
|
|
> |
|
