|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
El producto satisface las necesidades del servicio t
;
This is a good quality scan of the Operation & Maintenance (Service) Manual for the PAL version of this high-band broadcast umatic, BVU-800P
All schematics and lineup procedures appear to be included in this one manual AFAICT.
The file size is just over 113 MB which gives an idea of the quality and number of pages.
All of the schematics, which contain some fairly small print, are easily readable when you zoom into the page.
John Thompson, Newcastle Upon Tyne, England.
;
Good quality, all schematics of few of models. There is also short form of user manual and regulation manual.
;
Perfect copy of the service manual. you can enlarge every page, and it comes up
with all details.
;
It´s very very nice manual with all, what i need. Original in good quality. Very fast business. Very much thanks...
XV-HTD1
Trouble Shooting
Condition Condition Trouble Point
Tray does not open. (Nothing works) POWER OFF Key � "OFF" indication does not disappear 0 (OPEN) key � "OPEN" indication does not disappear 3 (PLAY) key � It becomes indication of "OPEN" from "NO DISC", and stop by the condition. (When a disc is not put in the Tray.)
Loading Motor is damage, disconnection or contact defectiveness.
1
Tray does not open. (Hear the clatter continuation sound.) It becomes the state that flashed indication of " 1 2 3 4 5
".
Contact defectiveness of Flexible Cable (7P) or the connector comes off, etc.. Tray Open/Close Position SW (S21) is damage or contact defectiveness, etc..
2 3
Tray opens it in POWER ON freely, and stay by the state.
Contact defectiveness of Flexible Cable (8P) or the connector comes off, etc..
4
Rotary Tray does not stop at the home position. (May stop on the way of rotation suddenly.)
Tray Position Detect Sensor (PC22) is damage or contact defectiveness, etc..
5
"CHANGE" indication does not change in POWER ON, and Rotary Tray does not move. (In this case only opening and closing of Tray are possible.)
Motor for Rotary Tray Drive is damage, disconnection or contact defectiveness.
6
Hear the clatter sound in clamp of the disc.
A gear of Planet Base deviates.
7 8
Rotation of Rotary Tray does not stop in POWER ON. In this case indication more than two which seems to be " 1 2 3 4 5 " lights, and abnormal indication appears.
Slit part of bottom of the Rotary Tray is damaged.
When Rotary Tray turns, hear the rattle and large sound.
Damage of Worm Gear or grease is insufficient.
9
Playback even if indicates it with "NO DISC". Take time till playbacks.
Disc Detect Sensor (PC21) is damage or contact defectiveness, etc..
10
96
|
|
|
> |
|
