We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
We received the manual in a timely manner and it was exactly what we were expecting. Excellent replacement for original Service Manual.
All schematics are very legible. We are really satisfied.
Great PDF easy to read good info needed for replacment of belts and assembly and specs.
Text excerpt from page 9 (click to view)
XV-S300BK/XV-S332SL/XV-S402SL/XV-S403SG 2.2 Loading assembly section 2.2.1 Removing the clamper assembly (See Fig.2-9) (1) Remove the four screws A attaching the clamper assembly. (2) Move the clamper in the direction of the arrow to release the two joints a on both sides. ATTENTION: When reattaching, fit the clamper to the two joints a.
Joint a Joint a
A
A
A
A
Fig.2-9 2.2.2 Removing the tray (See Fig2-10. and 2-11) � Prior to performing the following procedure, remove the clamper assembly. (1) Push b of the slide cam into the slot on the left side of the loading base until it stops. (2) Draw out the tray toward the front. ATTENTION: Before reattaching the tray, slide the part c of the slide cam to the right as shown in Fig.2-11.