|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I BOUGHT A PAIR OF INFINITY VINTAGE SPEAKERS THAT REQUIRED TO BE REPAIRED AND THE ELECTRONIC TECHNICIAN ASKED ME FOR THE SERVICE MANUAL.
I TRIED TO GET IT AT THE MANUFACTURER'S SITE WITH NO SUCCESS, SO I STARTED TO LOOK FOR IT IN THE WEB FOR A LONG TIME, UNTIL I FOUND THE SERVICE MANUAL IN THIS EXCELLENT SITE "OWNER'S MANUAL.COM".
NOW I HAVE MY SPEAKERS WORKING AND ENJOYING THE MUSIC I LIKE.
THANKS TO "OWNER`S MANUAL.COM" I RECOMMEND THIS SITE TO EVERYONE.
;
Very quick response. Very good and accurate print quality of the scanned document.
 ;
The service manual was very usable and clear enough to see the individual values of all of the components (unlike some of the service manuals I have gotten in the past from web sites similar to this one). The price was right and the information was greatly appreciated. It helped me with an otherwise very difficult repair. It was much needed and appreciated. A faster turn around on my order would be nice, but I understand the constraints on your staff's time. Thank you for your service.
;
Excellent manual. Helped me out with disassembling and troubleshooting my projector.
;
thanks you are the best.Very good detail, Quick service response. A useful service manual with all details.
1
2
3
4
2. Receiver (Wireless SP) side
(1) In a case where the power is not turned on (the POWER LED does not light)
A
No power (The POWER LED does not light.)
Insert the FFC correctly.
No
Is the FFC (*1) correctly inserted?
(*1) : FFC between CN5901 (RX Assy) and CN5902 (LED Assy)
Yes
B
Is the POWER LED lit?
No
Yes
Is the fuse FU1 blown?
No
Is the IC11 and/or IC14 in MAIN Assy broken? Yes Replace IC11 and/or IC14.
No
Check that the circuits are not short-circuited. As the circuit for +9 V is most likely to have been shortcircuited, check the circuits around IC15.
Yes Replace the FU1 fuse.
C
Yes
Yes
Is the POWER LED lit?
No
Is the POWER LED lit?
No
Yes Inspection completed.
Yes
(2) In a case where no sound is output
D
No sound
Check the Transmitter side.
No
Is TUNED LED lit? Yes
E
Check the "SP PROTECT"circuits around Q3455 and Q3454.
No
Is the relay on?
Yes
Replace IC12 and IC13.
No
Is +B voltage active?
Yes (A)
F
(B)
36
1 2
XW-DV535W
3 4
|
|
|
> |
|
