This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
Text excerpt from page 4 (click to view)
BEFORE STARTING
1 Open the dustbag cover. 2 Check that the dustbag is in place. 3 Insert the hose until the catch clicks to engage (press the catch to engage hose).
1 2 3
4 Attach the telescopic extension tube (Z2315) or plastic extension tubes (Z2306, Z2312) to the hose handle and the floor nozzle. 5 Pull out the cable and plug it in. Press the foot pedal to rewind the cable (take hold of the plug to prevent it striking you).
5 4 6
6 Press the On/Off button with control your foot to start the vacuum cleaner. 7 Adjust the suction power using the variable suction power control on the vacuum cleaner (Z2312, Z2315) or the suction control on the hose handle.
GETTING THE BEST RESULTS
Hard floors: Use the dual purpose floor nozzle with the left pedal in position (8).
7
Carpets: Use the dual purpose floor nozzle with the left pedal in position (9). Reduce suction power for rugs and fabrics. Upholstered furniture: Use the upholstery nozzle. Skirting boards, crevices, corners, etc.: Use the crevice nozzle. Hard floors / wooden / parquet: use the hard floor nozzle to avoid scratching (Z2315). (10)
