I purchased the unit from a private party and the original owners manual was not available. Having the ability to download it was extremely helpful and clarified operating the equipment immensely. This is a complicated unit and without the manual I would not have been able to maximize it's potential. Thank you.
Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
Text excerpt from page 6 (click to view)
HOW TO ASSEMBLE
Loop
Attach Handle
1. Locate the handle and body. 2. Line the handle up with the hole in the top of the body. Flat side of handle and loop forward. 3. Push handle down into body while pressing button on back of the body. Handle will click into place. 4. There are two handle positions available. Handle all the way up and handle all the way down. 5. Button needs to be depressed to raise and lower the handle. Handle
Body
Button
HOW TO USE Power Switch
The power switch has three positions. Off, Floor (hard surface cleaning) and Carpet.
Nozzle with Edge Kleener ®
Airflow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning. Experiment with your hard floor surfaces, sometimes it is best to have brush roll turning. (Switch in the carpet position).
Power Switch
Dual Uses
Push the handle button to release lock. The handle will slide freely until it finds one of the two available handle positions. It automatically locks in either of these two positions. With the handle collapsed, the unit is great for stairs and compact storage. With the handle extended, the unit is great for floor cleaning.