Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Text excerpt from page 5 (click to view)
HOW TO USE
Power Switch
1. This vacuum has a 3-position switch. O is Off, I is �Suction Only,� and II is �Suction and Brushroll.� 2. For bare �oor cleaning use suction only (I). For carpet cleaning, use suction and brushroll (II). The nozzle allows for low pro�le cleaning. Air�ow under the nozzle automatically directs suction to the edges and corners for maximum full width cleaning.
On/Off Switch
2
1
ROUTINE MAINTENANCE
The instructions in this booklet serve as a guide to routine maintenance. To keep the cleaner operating at top ef�ciency empty the dust cup and clean the �lter after each use. To maximize cleaner ef�ciency do not allow the dust cup to be �lled past the bottom of the �lter.
HOW TO USE ROUTINE MAINTENANCE Empty Dust Cup
3
4
Empty Dust Cup
CAUTION: Turn off the power switch and unplug the electrical cord to service. 3. Push dust cup release button. 4. Pull the dust cup away from the main housing. 5. Rotate the dust cup lid counterclockwise to remove. The dust cup �lter comes out with the dust cup lid. 6. Empty the dust cup into a waste container. (To clean �lter refer to dust cup �lter section.) 7. Put the lid back on dust cup. Be sure the gasket on the �lter bottom is centered in the inner tube and the lid is aligned correctly on the cup. Rotate the dust cup lid clockwise until it locks. 8. Place the bottom of the dust cup in the main housing. Push the top of the dust cup back into place until it locks.
5 6