|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
13.Volume Offset
Set the sound level of the each source selected by adjusting the level difference between the basic sound level and the required level. Display and setting: "Volume Offset" : - 8 � ± 0
Crossover Network Control Setting:
Adjust various parameters of sound quality.
1 Press the XOVER button for at least one second to enter the
control mode.
2 Selecting mode
Press either the FM or AM button. Each time the button is pressed, the adjustment mode will change. Please refer to the following for the contents of the adjustment modes. (Items 1-4 can be adjusted in this Adjustment mode.)
3 Adjust each mode
Press the 4/¢ button. Please refer to the following for the adjusting values.
4 Press the XOVER button for one second or more to end the
control mode.
1.High-pass Filter Frequency for Front Output
Adjust the frequency of the High-pass filter for front output. Display and setting: "FRNT HPF" : THROUGH / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz / 150Hz / 180Hz / 220Hz
NOTE
You can separately set the high-pass filter for front and rear output, including preouts. The high-pass filter does not affect the non-fading preout.
� 21 �
|
|
|
> |
|
