Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 16 (click to view)
Cleaning the oven door
The following instructions are relevant to the oven door as it is supplied by the Manufacturer. If the oven door has been reversed, please note that the references to the right and left side have to be switched.
A B
Figure 1. With the right hand, hold the aluminium slotted bar (�A�) while pulling off the inner glass support �B� with the left hand. Push the support towards the right to release it and then lift it up.
Figure 1
A
Figure 2. Remove the aluminium slotted bar �A� from support �C�.
C
Figure 2
Figure 3. Hold firmly the inner glass �D� with the left hand and pull the support �C� off from its original position. Make sure that glass �D� is firmly held to prevent it from falling down.
C D
Figure 3
Figure 4. Hold tighly the inner glass �D� with both hands and remove it from its original position by sliding it up. After removing the inner glass, clean the oven door and the glasses. We recommend to clean the oven door using only a wet sponge and dry it up after cleaning with a soft cloth. Never use steel wool, acids or abrasive products as they can damage the oven surface. After cleaning, place the inner glass �D� back in its original position. To correctly mount the inner glass �D� (with stripes along the sides) the surface marked with stripes has to face the oven door in a way that, when touching the surface on sight, the light roughness of the silk-screen printing is not perceptible. After placing the inner glass back, insert support �C� in its position and, then: