My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
This manual is very helpfull to use the Power Supply. All technical information has been available.
For service use the circuit diagrams are very good.
Thanks .
Very comprehensive document which is a must-have for any Satellit 2100 owner whose set up is somewhat intricate. Due to the bad quality of the pictures that are rather dark and a bit blurred I gave 4-star feedback.
The manual was missing 2 pages but when I presented the problem to the company they made every attempt to get the 2 pages to me, when they couldn't they refunded my money. A very pleasing and easy transaction. The manual they provided was the original, it was concise and to the point. I plan to do business with this company again when should the need arise.
The owners manual is very good. all my how to questions were answered in detail.
Text excerpt from page 16 (click to view)
Cleaning the oven door
The following instructions are relevant to the oven door as it is supplied by the Manufacturer. If the oven door has been reversed, please note that the references to the right and left side have to be switched.
A B
Figure 1. With the right hand, hold the aluminium slotted bar (�A�) while pulling off the inner glass support �B� with the left hand. Push the support towards the right to release it and then lift it up.
Figure 1
A
Figure 2. Remove the aluminium slotted bar �A� from support �C�.
C
Figure 2
Figure 3. Hold firmly the inner glass �D� with the left hand and pull the support �C� off from its original position. Make sure that glass �D� is firmly held to prevent it from falling down.
C D
Figure 3
Figure 4. Hold tighly the inner glass �D� with both hands and remove it from its original position by sliding it up. After removing the inner glass, clean the oven door and the glasses. We recommend to clean the oven door using only a wet sponge and dry it up after cleaning with a soft cloth. Never use steel wool, acids or abrasive products as they can damage the oven surface. After cleaning, place the inner glass �D� back in its original position. To correctly mount the inner glass �D� (with stripes along the sides) the surface marked with stripes has to face the oven door in a way that, when touching the surface on sight, the light roughness of the silk-screen printing is not perceptible. After placing the inner glass back, insert support �C� in its position and, then: