This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
Fast and courteous service. Product delivered as described. Thank you.
Text excerpt from page 10 (click to view)
To programme the Oven to switch off
1. Switch the oven on, place food in the oven, select a cooking function and adjust the cooking temperature, if required. 2. Touch the "Time Function" control . The symbol flashes near the "Cooking Duration" symbol . The time display shows "0.00" at the left hand and the current time of day at the right hand (Fig. 12). Symbol will flash for 5 seconds. Within this time, touch control � � to select the required time. Maximum time is 23 hours 59 minutes. Note that the time indication on the right hand will also change as you touch control � �, showing at which time the oven will automatically switch off (fig. 13). After another 5 seconds after you have set the time, the symbol stops flashing. This means that the setting has been stored in the Electronic Control memory and that the countdown started. When cooking time is over, the oven automatically switches off. You hear an acoustic alarm while symbol flashes and the time display shows "0.00". To switch off the acoustic alarm, touch any control.
3.
Fig. 12
4.
5.
6.
To cancel the Cooking Duration Time: Touch time function control : the symbol flashes near the "Cooking Duration" symbol . Then touch control � � until the time display shows "0.00". Please note that, if you cancel the "Cooking Duration", the oven does not switch off.
Fig. 13
To programme the Oven to switch on and off
1. Carry out the "Cooking Duration" setting as described at points 1 to 4 in the previous chapter. 2. Touch the "Time Function" control twice: the symbol flashes near the "End of Cooking Time" symbol (Fig. 14). 3. Within 5 seconds, touch control � � to select the required end of cooking time, which is shown at the right hand of the time display (Fig. 15). 4. After another 5 seconds after you have set the time, the symbol stops flashing, the thermometer symbol comes off, the temperature display shows "30" and the oven switches off. This means that the setting has been stored in the Electronic Control memory and that the countdown started. 5. The oven will switch on and off automatically according to your settings. When cooking is completed, you hear an acoustic alarm while both symbols and flash. The time display shows "0.00" at the left hand. 6. To switch off the acoustic alarm, touch any control. To cancel the programme, simply cancel the Cooking Duration time as described at the end of the previous chapter.
