Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
Text excerpt from page 12 (click to view)
125992770.qxp
2004-09-07
07:53
Page 12
Operating Sequence
Before using your tumble dryer for the first time, we recommend to place a few damp cloths inside the appliance and dry for 30 minutes. There may be dust inside a brand new tumble dryer. Example: Press the «Change» button until the desired language appears in the display.
Drying
1. Connect the appliance. 2. Open the door (see picture).
Language ENGLISH
Sprache DEUTCH
Temp.
Spin
Options
Change
Exit
Temp.
Spin
Options
Change
Exit
A
Press the EXIT button to confirm the selection.
Einstellungen
P1149
P1108
Temp.
Spin
Options
Change
Exit
3. Load the items one at a time, shaking them out loosely. 4. Close the door. Please check the laundry does not get caught between the door and filter. 5. Turn the selector dial to the desired programme to switch the appliance on. To switch the appliance off turn it to «Reset/Off».
2 Reset/ Off
B
Memory Memory 1 Cooling 30 min 60 min Baby
Cotton extra dry Ready to wear Store dry Slightly damp Iron dry Machine iron dry
All indicators on the display will appear in this language from now on. Note: If the undesired language has been set, press the «Spin and Option» buttons simultaniously for about 3 seconds in order to change the language. Follow the instructions as before. Setting the time You should set the time prior to the first drying cycle and when changing to and from daylight savings time. See «Clock setting», Menu. 6. Turn the selector dial, in order to select the desired programme. The relevant message will appear in the display. The display will show the end cycle time «Cycle end at» of the selected programme, calculated on the basis of the maximum load for each type of fabric. The START/PAUSE button light will start flashing. If the load of laundry to be dried is small, at the beginning of the cycle the display will still indicate the end cycle relevant to the maximum load.
Iron dry
Store dry
Synthetic extra dry
Switching on the appliance for the first time. Language When switching on the appliance for the first time you must set the language in which you want the indicators on the display to appear. Important! If the display is not showing any language, the appliance has already been switched on once. In such case, go to the chapter «Change language» if you would like to change the language setting.